Home
About Us
Automation Case
Products
Quality
Resources
Contact Us
Home > Cold Forging Machine > Cold Forging Machine


  • Cold Forging Machine Use and characteristic

    1、Non-oil self-lubricating bearings are qualified to improve the application life and abrasion resistance of the coupling shaft, as well as reduce energy consumption.

    2、Circuitry for the converter plus PLC, not only continuously variable transmission, the machine can work in automatic detection of the fault condition shutdown.

    3、Using pneumatic air clutch to start the current, brake smoothly, except to move the slider or the outside could stop time to stop after the death, to provide maximum room for maneuver.

    4、In order to decrease the pollution of hot-oil gas spray to the working environment, close guard is designed and developed.

    5、The machine set pressure oil line protection devices to ensure that all parts of the machine running the full lubrication. Set air way pressure protection device, overload protection of the machine, improve mold life.

    6、Make sure the machine can be tested in convenience, then, for the security of the staff, building safety protection door and teaching the operators to carry out standard operation are also of great importance.



    6 Die 6 Blow Cold Heading Machine use large-scale three-coordinate measuring machine, to ensure the processing accuracy of each factory machine.


    Nippers and clamps: the bevel gear rotates the nippers to reciprocate the workpiece to ensure the safety of operation. Cylinder type open and close clamp transmission, adjustable clamp force. The flip-type large-opening clamp mechanism flips in a 90-degree, 180-degree flip. Seven-mode and eight-clamp design to prevent finished parts from damaging the appearance due to bumps.



    Frequency converter: The brand of the frequency converter is Germany or Japanese, which can adjust the frequency to reach continuously variable speed to set up the machine production speed. Manufacture the products with the most economical cost and the most reasonable production speed to save production cost effectively.


    The PLC control system Is equipped with the Japanese brand programable digital controller. The function of the system is including controlling electrical equipment and safety detection device, remote control technology, remote debugging technology, face recognition system, intelligent control technology. It's also convenient to be repaired, set and modified.


    Clutch: Equipped with pneumatic clutch and pneumatic brake to avoid the starting current generating repeatedly, convenient for parking and reversing and improve the efficiency of mold debugging in the process of installation.


    The linear feeding structure: when the wire material is being cut, it will be fixed and will not rebound, and the quick cutting device is used to improve the cutting accuracy and the smoothness of the cutting edge, which is suitable for the production of high-end special shaped parts.


    Feeding and scissors: The linear feeding structure controlled by computer ensures the service life of feeding pawl, and the S type cutter plate can bear greater axial force. And also be Equipped with automatic shutdown device for short-inch detection.


    With cutting part is actuated by strong link-block system, the movement is stable and reliable, as well as by using circular shears for assuring the kerf clear and neat.


    Swing pneumatic clamp: the clamping force can be adjusted according to the property of the material In the short-inch, the first set of clamp is automatically unclamped. The last set of clamp will put the finished product into the internal conveyor belt to ensure the integrity of the finished parts.


    With high-grade configuration, easy for adjustment and centralized compressed-air system.


    Each station of K.O. structure can be adjusted independently, and the last station can realize the action of trimming by adjusting the cam position or changing another cam. It is equipped with a safety pin to check up the pressure.


    Lathe bed: Equipped with nodular cast iron QT500 thickening lathe bed and box-shaped structure, which improves the machine overall strength and makes it more stable in the process of working, so the products are more accurate, production speed is faster and the service life of machine is longer.


    P K.O. and K.O. structure is controlled by a digital servo motor, and can be set for remote debugging It's convenient for debug and it can ensure the finished products with manufacturing of high precision.


    Main sliding table: Main sliding table and back support mechanism keep dynamic balance in the process of operation, which is easy to adjust the position of movable mold to ensure the machine is stable and not easy to wear during operation, to maintain a high precision even after long-term use.


    Please contact us to buy the Steel Nut Equipment



  • Model
    Unit

    SJNF

    11B-6SL

    SJNF

    11B-6SL

    SJNF

    11B-6SL

    SJNF

    11B-6SL

    SJNF

    11B-6SL

    SJNF

    11B-6SL

    SJNF

    11B-6SL

    SJNF

    11B-6SL

    Forging station NO. 6 6 6 6 6 6 6 6
    Cut-off dia.(Max) mm 11 14 17 19 21 24 28 30
    Cut-off length(Max) mm 25 30 35 35 30 60 45 60
    Kick out length(Max) mm 30 40 45 60 60 80 80 80
    P.K.O length(Max) mm 15 19 20 20 25 24 30 35
    Dies pitch mm 50 60 70 80 90 100 120 140
    Forging power

    kgs

    56000 120000 125000 185000 170000 300000 350000 400000
    Products mm Φ11*30L
    Φ14*40L
    Φ17*45L
    Φ19*60L
    Φ22*50L
    Φ24*80L
    Φ30*50L
    Φ33*80L
    Main motor kw 11 22 30 45 50 55 100 160
    Lubrication motor kw 1.5 2.2 2.2 2.2 2.2 2.2*2 2.2*2 2.2*2
    Lubricant L 600 900 1000 1200 1500 1600 1750 1800
    Approx weight Ton 5.5 8.8 10.5 18 24 32 40 55

Sitemap| Blog | XML  Copyright 2016-2025 © Haisen All Right Reserved Designed and Developed by www.hoogege.com

Contact